SSC JHT Signature Size: 10–20 KB, 6×2 vs 4×2 cm

 

Candidates searching for SSC JHT signature size can easily become confused because different websites show different centimetre and pixel values. There is a genuine reason to be careful: the current official Combined Hindi Translators examination notice itself contains more than one signature-dimension reference in different sections.

The requirements that remain consistent are much clearer. The scanned signature is required in JPEG/JPG format and the file size should be 10–20 KB. The main application instructions specify an image of about 6.0 cm wide × 2.0 cm high, while another application-form annexure refers to about 4.0 cm × 2.0 cm.

Quick answer: For SSC JHT/Combined Hindi Translators, prepare the signature as a clear JPEG/JPG file between 10 KB and 20 KB. Do not blindly assume one centimetre or pixel size because the official notice contains both 6×2 cm and 4×2 cm references in different sections. Check the dimension shown in the application instructions you are actually following, then use the tool above to prepare that output.

SSC CGL Signature White Background: What Official Rules Say

 

Quick answer: A pure-white background or a particular ink colour should not be treated as a universal SSC CGL signature rule simply because a third-party website says so. In the official CGL notice checked for this guide, the signature instruction specifies JPEG/JPG format, a 10–20 KB file-size range and signature dimensions, but it does not include a separate statement in that signature instruction making a pure-white background or a particular black/blue ink colour mandatory.

There is another important detail. Different sections of the same official notice give different approximate signature dimensions: one section uses about 6.0 cm × 2.0 cm, while the online-application annexure uses about 4.0 cm × 2.0 cm. This is why the safest approach is to follow the exact instruction displayed for the application you are actually completing instead of copying one fixed specification from a search result.

The signature tool above is useful for this approach because you can start from your original image, inspect the crop, choose the required dimensions, check the JPG result and use custom settings when the application asks for something different.

Is a White Background Compulsory for an SSC CGL Signature?

The official CGL notice checked for this article does not contain a separate signature instruction stating that the signature background must be digitally converted to pure white.

This distinction matters because search results often mix three different things:

• an official requirement stated by SSC;
• a practical recommendation for creating a clear signature photograph; and
• a feature offered by a third-party image tool.

Those three are not automatically the same thing.

A website may offer a “background cleaner” or automatically replace paper pixels with white. That describes what its tool does; it does not by itself prove that SSC requires every candidate to digitally whiten a signature image.

If the active SSC application page or applicable official instruction specifically asks for a particular background, follow that instruction. If no such requirement is shown, avoid inventing an additional rule from an unrelated website.

What the Official CGL Signature Instructions Actually Specify

The official CGL notice reviewed for this guide provides several concrete technical requirements. It also demonstrates why checking the complete application instruction is more reliable than copying a single number from another website.

Check	What the official notice reviewed for this guide shows
File format	JPEG/JPG
File size	10–20 KB
Dimension in the main instruction	About 6.0 cm wide × 2.0 cm high
Dimension in the application annexure	About 4.0 cm wide × 2.0 cm high
Visual quality	A blurred signature can be unsuitable
Pure-white signature background	No separate mandatory wording was found in the signature instruction checked
Black or blue ink	No separate mandatory ink-colour wording was found in the signature instruction checked

You can verify the applicable notice and current application information on the official Staff Selection Commission website.

Important: This does not mean that background or ink colour can never be specified in another SSC examination, another instruction or the active application portal. It means you should not convert a recommendation found elsewhere into a universal SSC rule. Always give priority to the instruction applicable to your own form.

Why Do So Many Websites Say “Black Ink on White Paper”?

There are several reasons online instructions can differ.

First, a third-party guide may reuse an older specification or a specification belonging to another recruitment portal. Second, some sites combine requirements for different examinations into one table. Third, a tool that includes background whitening may describe that feature as part of its recommended workflow even when the official instruction you are following does not explicitly require digital background replacement.

This is especially important with signature dimensions. Current search results can show fixed pixel values such as 140 × 60 pixels, while the official CGL document checked for this guide uses centimetre-based dimensions and even contains two different approximate dimension references in different sections.

Therefore, “I found this number on Google” is not enough verification for an application document.

Should You Digitally Whiten the Signature Background?

Do not automatically alter the background merely to make the file look more artificial or more like an example from another website.

A phone photograph of white paper may appear slightly warm, grey or uneven because of room lighting, camera exposure or shadows. Turning every near-white pixel into pure white is an image modification. Depending on how aggressively it is done, it can also affect faint pixels near thin handwriting strokes.

The better starting point is a clear original image:

• keep the entire handwritten signature in focus;
• use even lighting;
• avoid a strong shadow across the writing;
• keep the camera reasonably parallel to the paper;
• avoid repeated screenshots or messaging-app copies when the original is available; and
• preserve all dots, loops, underlines and finishing strokes.

If the application you are completing explicitly requires a particular background or ink colour and your original signature does not satisfy that instruction, creating a fresh compliant source is safer than digitally recolouring the handwriting.

How the Tool Above Handles Your Original Signature

The tool on this page is designed around preservation rather than cosmetic background replacement.

It can accept a supported raster image or single-page PDF, analyse the visible handwriting region, provide an automatic crop starting point, let you adjust the crop directly in the Original Preview and prepare a JPG/JPEG result. You can also enter custom width, height and maximum-KB values when the form requires a different output.

The normal signature-processing workflow runs locally inside a compatible browser. The tool does not intentionally whiten the paper, remove its natural texture, recolour the signature ink, redraw the handwriting or apply artificial sharpening simply to change the appearance of the source.

You can read more about this processing approach on the About SSC Signature Resize page.

How to Prepare the Signature on This Page

1. Read the application instruction first

Before changing the image, identify the required format, minimum KB, maximum KB and width/height shown for the application you are completing.

Do not begin with a number copied from another examination simply because both forms are operated by SSC.

2. Upload the clearest original

Use the upload control in the tool above and select the clearest available source. Starting from the original photograph or scan generally gives the resizing process more useful image detail than starting from an image that has already been compressed several times.

3. Inspect the automatic crop

Automatic detection is a useful starting point, not a substitute for checking your actual handwriting.

Look at the beginning and end of the signature, upper loops, lower loops, dots, underlines and faint finishing marks. If anything is too close to a crop edge, move the crop boundary outward before creating the final file.

4. Do not remove every pixel of surrounding paper

A useful crop removes distant unused space while leaving a small natural margin around the handwriting. Cropping directly against the ink increases the chance of cutting a genuine stroke.

At the same time, keeping a full sheet of paper around a small signature can make the handwriting appear miniature after resizing.

5. Choose dimensions from the form, not from a random search result

The default tool profile is useful only when it matches the requirement you are following. If the application shows another width and height, use the Custom controls in the tool above.

If you are trying to understand the relationship between centimetres and pixels, read the 6 cm × 2 cm signature pixels guide. It explains why one physical size does not produce one universal pixel number without considering pixel density.

6. Check the final JPG visually

A correct KB number is not enough. Before downloading, confirm that:

• the complete signature is visible;
• the handwriting is not stretched;
• the signature does not look miniature;
• the orientation is correct;
• the result is genuinely JPG/JPEG when that format is requested;
• the displayed dimensions match the requirement you are following; and
• the final file size is inside the complete permitted range.

7. Check the SSC portal preview

After uploading the downloaded file to the application, inspect the portal's own preview before final submission. A file can be technically valid on your device yet still reveal a crop, orientation or visibility problem when displayed inside the application form.

Should You Use 140 × 60 Pixels for SSC CGL?

Do not treat 140 × 60 pixels as a universal SSC CGL requirement unless the application instruction you are following actually asks for that size.

A fixed pixel preset displayed by a third-party tool is not automatically an official specification.

The CGL notice checked for this guide uses centimetre-based references rather than declaring 140 × 60 pixels as the universal signature size. This is why the tool above includes custom dimensions rather than forcing every application into one permanent pixel profile.

What About 6 × 2 cm Versus 4 × 2 cm?

This is one of the most useful examples of why applicants should verify the exact instruction instead of relying on memory.

In the official CGL document reviewed for this guide, the main application section gives an approximate 6.0 cm × 2.0 cm signature dimension. A separate online-application annexure in the same document gives about 4.0 cm × 2.0 cm.

Those two boxes also have different proportions. Simply stretching the same handwriting to fill either box would not be a good solution.

When the active application or instruction provides the dimension you must use, enter that requirement in the tool and preserve the natural proportions of the handwriting rather than deliberately stretching it.

Can You Use a Phone Photo of the Signature?

A clear phone photograph can be a suitable source for resizing when the complete handwriting is sharp and properly captured.

The camera itself is not the main issue. Source quality is.

A well-focused phone image can be more useful than a blurry scan, while an out-of-focus high-resolution photograph can still produce a poor small JPG. Capture the handwriting clearly and inspect the final processed result rather than judging quality only from the original file size.

Do Not Confuse Signature Rules with Photograph Rules

Instructions applying to a candidate photograph should not automatically be transferred to the signature.

For example, a live photograph may have instructions about lighting, face position, glasses or the background. Those photograph instructions do not automatically become signature requirements unless the signature section says so.

When reading an official notice, identify the paragraph dealing specifically with the signature and distinguish it from the photograph, document or identity instructions around it.

Common Mistakes to Avoid

• Copying the first pixel size from Google: verify it against the actual application.
• Assuming a background-cleaning feature is an official requirement: tool features and official rules are different things.
• Digitally recolouring handwriting: if a specific ink colour is expressly required, use a suitable original instead.
• Whitening a poor photograph instead of fixing the source: a clear original is more useful than aggressive editing.
• Checking only file size: dimensions, format, crop, orientation and clarity also matter.
• Cropping too tightly: preserve the complete first and final strokes and a small surrounding margin.
• Using a full-page scan: excessive unused paper can make the final signature appear miniature.
• Repeatedly compressing the downloaded JPG: return to the original source when creating another version.

For a complete final inspection, use the SSC signature upload checklist before submitting the file.

If Your Signature Is Stored as a PDF

Do not simply rename a PDF file to .jpg. Changing a filename extension does not convert the underlying file format.

If your signature exists only in a supported single-page PDF, the tool above can use that file as the source and prepare a JPG result. If you also have the original clear photograph or scan, prefer whichever source preserves the handwriting more clearly.

See the detailed SSC signature PDF to JPG guide for the complete workflow.

Frequently Asked Questions

Is a pure-white background mandatory for an SSC CGL signature?

The official CGL signature instruction checked for this guide does not contain a separate statement making a digitally pure-white signature background mandatory. If the active application portal or applicable instruction explicitly gives a background requirement, follow that specific instruction.

Does an SSC CGL signature have to be made with black ink?

Do not assume a universal ink-colour rule from a third-party page. The signature instruction reviewed for this guide does not contain a separate mandatory black-ink or blue-ink statement. If your particular application explicitly specifies an ink colour, follow it and use an appropriate original signature.

Should I change blue ink to black using an editor?

If a form specifically requires a different ink colour, making a fresh compliant signature is preferable to digitally recolouring the handwriting. The tool above is not designed to change the identity or colour of your signature strokes.

Does the tool above make the paper background white?

No. Its normal processing is designed to preserve the selected source appearance rather than intentionally whitening the paper, replacing its natural texture or recolouring the ink.

Should I use 6 × 2 cm or 4 × 2 cm?

Use the dimension applicable to the instruction you are actually following. The official CGL document reviewed for this guide contains different approximate dimension references in different sections, which is exactly why one number should not be treated as universal.

Is 10–20 KB enough to guarantee acceptance?

No. File size is only one technical check. The final image may also need the correct format and dimensions, and the complete handwriting should remain clear, properly oriented and uncropped.

Can this website guarantee that SSC will accept the processed signature?

No independent image tool can guarantee acceptance by an external application system. The applicable SSC instructions and the active application portal remain the final sources for submission requirements.

Final Check Before You Submit

Use the tool above to prepare the signature, but make the final decision from the actual application requirement.

• Check the applicable official SSC instruction.
• Use the clearest original signature source.
• Keep the complete handwriting inside the crop.
• Do not deliberately stretch the signature.
• Do not assume that digital background whitening is mandatory.
• Use custom dimensions when your form requires them.
• Confirm genuine JPG/JPEG format when requested.
• Check both the minimum and maximum KB values.
• Open the downloaded JPG once.
• Inspect the final preview inside the application portal.

The purpose of resizing is not to create an artificially different signature. It is to prepare a technically suitable image while keeping the candidate's complete natural handwriting visible.

SSC Signature Resize is an independent browser-based utility and is not affiliated with, operated by, sponsored by or endorsed by the Staff Selection Commission or the Government of India. Always verify application requirements on the official SSC website before submitting your file.

SSC Signature Resize Kaise Kare Mobile Se? 10–20 KB JPG Guide

 

Agar aap SSC application form mobile se fill kar rahe hain aur signature image ka size, JPG format, crop ya dimensions sahi karne mein problem aa rahi hai, to isi page ke upar diya gaya tool aapko signature prepare karne mein help karta hai. Aap phone gallery se apni source signature image select kar sakte hain, crop check kar sakte hain, zarurat ho to rotate kar sakte hain aur final JPG download karne se pehle dimensions aur file size dekh sakte hain.

Sabse important baat: kisi bhi ek pixel size ko har SSC examination ke liye permanent rule na samjhein. Kai SSC instructions mein signature ke liye JPEG/JPG, 10–20 KB aur lagbhag 6 cm × 2 cm jaise specifications use kiye jaate hain, lekin aapko hamesha apne applicable examination notice mein diye gaye instructions ko final maana chahiye.

Ye guide specifically un users ke liye hai jo poora kaam mobile browser se karna chahte hain aur generic image compressor use karke signature ko unnecessarily blur, stretch ya crop nahi karna chahte.

SSC Signature Mobile Se Resize Karne Ka Quick Answer

Mobile se SSC signature prepare karne ka simple process ye hai: clear source image rakhein, is page ke upar tool mein upload karein, automatic detection ke baad poori handwriting ko Original Preview mein check karein, required size select karein ya notice ke hisab se custom dimensions enter karein, final JPG ka size aur dimensions verify karein aur uske baad file download karein.

Sirf file ko 10–20 KB range mein lana sufficient nahi hota. Signature ka complete visible hona, natural shape maintain rehna, correct orientation, required format aur applicable dimensions bhi important hain.

Mobile Se Signature Ki Achhi Source Image Kaise Banaye?

Resizing se pehle source image ki quality sabse zyada matter karti hai. Agar original image hi badly blurred hai ya signature ka koi stroke source image mein missing hai, to resizing ya compression us missing detail ko reliably restore nahi kar sakti.

1. Signature ko clean aur flat paper par clearly karein.
2. Applicable SSC notice mein ink ke baare mein koi specific instruction ho to usi ko follow karein.
3. Paper ko flat surface par rakhein aur heavy shadow ya uneven lighting avoid karein.
4. Phone camera ko paper ke reasonably parallel rakhein.
5. Photo lene se pehle focus signature par check karein.
6. Signature ke beginning aur ending strokes ko image edge se chipka kar capture na karein.
7. Digital filters se ink, handwriting shape ya background unnecessarily change na karein.

Professional scanner hona zaroori nahi hai. Clear aur properly focused source image se final small JPG ko readable rakhna comparatively easier hota hai.

Step-by-Step: SSC Signature Resize Kaise Kare Mobile Se

1. Upar Diye Gaye Tool Mein Signature Select Karein

Isi article ke upar signature resizing tool automatically available hai. Upload Signature option se apne phone ki gallery se source image select karein.

Tool supported image files ke saath single-page PDF source ko bhi process kar sakta hai aur final output JPG/JPEG format mein prepare karta hai.

2. Original Preview Ko Dhyan Se Check Karein

Image load hone ke baad tool visible handwriting region ko detect karke initial crop prepare kar sakta hai. Automatic detection useful starting point hai, lekin final result ko preview mein manually check karna zaroori hai.

Signature ka first stroke, last stroke, dot, upper flourish aur lower flourish sab crop ke andar hone chahiye. Agar koi important part crop boundary ke bahut close hai, Original Preview par available crop handles se area adjust karein.

3. Crop Ko Safe Rakhein

Bahut zyada blank space rakhne se final image mein signature chhota dikh sakta hai. Bahut tight crop handwriting ka koi important stroke cut kar sakta hai.

Goal ye hai ki complete signature clearly visible rahe aur uske around reasonable natural background bhi available ho.

4. Signature Wrong Orientation Mein Ho To Rotate Karein

Agar phone image sideways capture hui hai, tool ka rotation control use karein. Rotation change karne ke baad crop aur result ko dobara inspect karein.

Signature ko forcefully stretch karke horizontal banane ke bajay correct orientation aur proper crop use karna better hai.

5. Required Dimensions Select Karein

Tool ka general default profile approximately 6 cm × 2 cm proportion ke around configured ho sakta hai. Lekin har SSC recruitment ya examination ke liye isi dimension ko universal rule na samjhein.

Agar aapke applicable notice mein different width, height ya file-size requirement di gayi hai, to tool ke custom dimension aur size controls use karein.

Application instructions mein jo requirement di gayi hai, usi ko priority dein.

6. File Size Range Ko Samjhein

Kai SSC instructions signature ke liye JPEG/JPG file ko 10–20 KB range mein maang sakti hain. Tool output ko allowed limit ke andar rakhne ke liye compression apply kar sakta hai.

File ko exactly 10 KB ya exactly 20 KB banana generally objective nahi hota. Important ye hai ki applicable allowed range ke andar rahe aur signature ki readability unnecessarily destroy na ho.

7. Final Result Ko Verify Karein

Download karne se pehle result panel mein available information check karein:

• final image dimensions,
• final file size,
• JPG/JPEG output format,
• crop result,
• signature visibility,
• selected settings.

Technical numbers sahi hone ke saath final signature visually bhi original source ke natural appearance ke close rehna chahiye.

8. Downloaded JPG Ko Ek Baar Open Karein

Final file download karne ke baad phone gallery ya file viewer mein usse ek baar open karein. Is simple check se cut stroke, excessive blank area, wrong rotation ya unwanted blur jaise issues upload se pehle detect kiye ja sakte hain.

Generic Image Compressor Aur Signature Resizer Mein Difference

Normal image compressor ka primary goal aksar sirf file size reduce karna hota hai. SSC signature preparation mein sirf KB hi important nahi hota. Crop, aspect ratio, complete handwriting visibility, orientation, format aur required dimensions bhi matter kar sakte hain.

Example ke liye, koi generic compressor ek large phone photo ko 15 KB bana sakta hai, lekin agar us photo mein poora paper visible hai aur signature bahut chhota reh gaya hai, to sirf correct KB value useful result guarantee nahi karti.

Isi wajah se signature-specific workflow mein pehle actual signature region aur final framing ko check karna useful hota hai.

140×60, 236×79 Ya 709×236 — Kaunsa SSC Signature Size Sahi Hai?

Internet par SSC signature ke liye alag-alag pixel dimensions mil sakte hain. Inmein se kisi ek pixel size ko sabhi SSC forms ka permanent universal standard maan lena safe approach nahi hai.

Physical centimetre measurement ko pixels mein convert karne par result chosen resolution ya DPI se linked hota hai. Isi wajah se different websites par different pixel dimensions dikh sakte hain.

Agar applicable notice direct pixel size deta hai, us value ko follow karein. Agar notice physical dimensions deta hai, to tool ke appropriate settings use karein. Random competitor preset ko official requirement na samjhein.

Kya Har SSC Exam Mein 6 cm × 2 cm Signature Hota Hai?

Nahi. 6 cm × 2 cm commonly used specification ho sakta hai, lekin recruitment-specific instructions alag ho sakti hain.

CGL, CHSL, MTS, GD, CPO, JE, Stenographer, Selection Post ya kisi bhi dusre SSC examination ke liye applicable official notice ki signature requirement ko final maana jana chahiye.

Agar required dimensions website ke default se different hain, tool mein custom values use ki ja sakti hain.

Signature Background Ko Artificially White Karna Chahiye?

Agar source paper clean aur evenly lit hai, to usually aggressive background editing ki zarurat nahi hoti.

Background ko artificially pure white karne, brightness badhane, contrast modify karne ya signature ko sharpen karne se thin handwriting strokes change ho sakte hain.

Tool ka standard workflow source image ke original pixels aur natural appearance ko preserve karne par focus karta hai. Agar source image mein strong shadow, severe blur ya poor lighting hai, to better source image lena usually safer solution hai.

Signature Resize Karte Waqt In Common Mistakes Se Bachein

• Sirf KB check karna: final dimensions aur visible signature bhi check karein.
• Photo aur signature rules mix karna: photograph aur signature ki requirements alag ho sakti hain.
• Random pixel preset use karna: official requirement verify karein.
• Bahut extra blank space: signature final image mein bahut chhota dikh sakta hai.
• Over-cropping: handwriting ka important stroke cut ho sakta hai.
• Stretching: signature ki natural shape distort ho sakti hai.
• Heavy filters: original appearance change ho sakti hai.
• Blurred source ko repeatedly compress karna: quality aur kharab ho sakti hai.
• Preview skip karna: download se pehle result zaroor inspect karein.

Mobile User Ke Liye Simple Workflow

Agar aap poora SSC application phone se complete kar rahe hain, to multiple editing apps use karne ke bajay simple workflow follow kar sakte hain:

1. Clear signature source image ready karein.
2. Isi page ke upar tool mein upload karein.
3. Automatic detection ke baad crop verify karein.
4. Required dimensions aur file size settings check karein.
5. Final preview inspect karein.
6. JPG download karein.
7. Downloaded file ko ek baar open karke verify karein.
8. Uske baad SSC portal par upload karein.

Standard processing browser ke andar hoti hai. Website ki data-handling information ke liye Privacy Policy padh sakte hain.

Agar SSC Portal Signature Upload Nahi Kar Raha To Kya Karein?

Upload failure ka reason hamesha resizing problem nahi hota. Pehle final downloaded file ko check karein.

Verify karein ki:

• file required JPG/JPEG format mein hai,
• file size allowed range ke andar hai,
• required dimensions correct hain,
• signature complete visible hai,
• file corrupt nahi hai.

Agar ye sab correct hai aur portal phir bhi upload nahi karta, to browser session, network connection, portal-side validation ya temporary application-page issue bhi possible ho sakta hai.

Image ko baar-baar compress karke quality destroy karne ke bajay portal ka exact error message padhein aur usi property ko correct karein.

Frequently Asked Questions

SSC signature resize mobile se ho sakta hai?

Haan. Is page ke upar available tool ko mobile browser se use karke signature crop, resize aur JPG format mein prepare kiya ja sakta hai.

SSC signature ko exactly 10 KB banana zaroori hai?

Nahi. Agar applicable instructions 10–20 KB range deti hain, to objective generally file ko allowed range ke andar rakhna hota hai. Exact requirement ke liye apna applicable notice verify karein.

Kya 20 KB se kam signature hamesha valid hota hai?

Nahi. Minimum file-size requirement bhi ho sakti hai. Sirf maximum KB check karna sufficient nahi hai.

Kya main custom signature dimensions use kar sakta hoon?

Haan. Agar applicable SSC notice mein different width, height ya maximum file size diya gaya hai, to tool ke custom settings use kiye ja sakte hain.

Kya tool blurred signature ko clear bana dega?

Resize aur compression existing image ko prepare karte hain, lekin badly blurred source mein missing handwriting detail reliably recreate nahi ki ja sakti. Clear source image se dobara start karna better hai.

Kya final output JPG mein milta hai?

Haan. Tool processed signature ko JPG/JPEG output ke roop mein prepare karta hai.

Kya tool use karne se SSC application guaranteed accept ho jayegi?

Nahi. Koi independent resizing website application acceptance guarantee nahi kar sakti. Tool sirf signature image prepare karne mein help karta hai. Final acceptance applicable SSC instructions, application details aur portal validation par depend karti hai.

Kya signature processing ke liye image server par bhejna zaroori hai?

Standard resizing workflow browser ke andar process hone ke liye designed hai. Detailed information ke liye website ki Privacy Policy check karein.

Final Check Before SSC Signature Upload

Final signature upload karne se pehle sirf file size na dekhein. Confirm karein ki complete handwriting visible hai, image correct orientation mein hai, signature unnaturally stretched nahi hai, JPG/JPEG format correct hai aur dimensions/file size applicable SSC instructions ke according hain.

Agar result satisfactory nahi hai, to SSC Signature Resize tool par fresh source image se dobara process karein.

About This Tool

SSC Signature Resize ek independent browser-based utility website hai jo users ko signature images crop, resize aur compress karne mein help karti hai.

Website Staff Selection Commission ya Government of India ki official website nahi hai aur kisi official approval, selection ya application acceptance ki guarantee nahi deti.

Important: Signature upload karne se pehle apne applicable SSC examination notification aur official application instructions ko final reference ke roop mein verify karein.

SSC CHT/JHT Signature Size 2026: 6×2 or 4×2 cm? Official Notice Explained

If you are checking the SSC JHT signature size 2026 or the signature requirement for the SSC Combined Hindi Translators Examination 2026, you may come across two different measurements: 6 cm × 2 cm and 4 cm × 2 cm.

This is not simply a case of two third-party websites giving different information. The official SSC Combined Hindi Translators Examination 2026 notification itself contains both measurements in different parts of the document.

In the main application instructions, paragraph 8.7 asks candidates to upload a scanned signature in JPEG/JPG format, 10 KB to 20 KB, with an image dimension of about 6.0 cm wide × 2.0 cm high. A later application-procedure section in the same official PDF, however, mentions about 4.0 cm × 2.0 cm.

This guide explains that conflict instead of hiding it, shows what the numbers actually mean, and explains how to use the signature tool above without assuming that one dimension is correct for every SSC form.

Important current-status note: The online application deadline for the Combined Hindi Translators Examination 2026 was 14 May 2026. This article explains the 2026 notification for candidates checking their submitted application, researching the requirement, or preparing for a future cycle. For any new SSC cycle, always check the newly issued notification instead of treating the 2026 measurements as permanent.

SSC CHT/JHT Signature Size 2026: Quick Answer

The clearest signature instruction in the main body of the 2026 Combined Hindi Translators notification is paragraph 8.7. It specifies:

• Format: JPEG/JPG
• File size: 10 KB to 20 KB
• Approximate physical size: 6.0 cm width × 2.0 cm height
• Quality: the signature should not be blurred or miniature

However, a later procedure section in the same notification says approximately 4.0 cm × 2.0 cm. Because the official document contains this inconsistency, it would be misleading to pretend that the 4×2 reference does not exist.

A practical approach is to treat the main application instruction as the clearest general requirement for that notice while also checking any exact dimension displayed by the actual SSC application interface. If an application page explicitly shows a different size, follow the instruction displayed for that application rather than forcing a generic preset.

You can review the source directly on the official Staff Selection Commission website.

Why Does the Same SSC Notification Show 6×2 cm and 4×2 cm?

The important point is that the conflicting values are located in different sections of the document.

Location in 2026 notification	Signature instruction
Main application instructions, para 8.7	JPEG/JPG, 10–20 KB, about 6.0 × 2.0 cm
Later online-application procedure section	JPEG/JPG, 10–20 KB, about 4.0 × 2.0 cm

The file-size requirement remains consistent at 10–20 KB. The difference is in the physical width of the signature frame.

A 6×2 cm frame has a 3:1 aspect ratio. A 4×2 cm frame has a 2:1 aspect ratio. They therefore cannot be treated as identical dimensions.

Simply stretching a 6×2 signature into a 4×2 box can make the handwriting look unnaturally compressed. Similarly, forcing a naturally wide signature into a narrower frame can make the handwriting too small or cause parts of the signature to be cut.

Which Size Should You Enter in the Tool Above?

The tool above currently uses a 6 cm × 2 cm profile as its default SSC output. That profile corresponds to approximately 709 × 236 pixels at 300 DPI and uses a 10–18 KB safety output range.

There are two important distinctions here.

First, the official CHT/JHT 2026 instruction says 10–20 KB. The tool's 10–18 KB default is a safety target inside that range; 18 KB is not being presented as the official SSC maximum.

Second, 709 × 236 pixels is a mathematical representation of 6×2 cm at 300 DPI. The CHT/JHT notification gives the physical measurement in centimetres; it does not state that 709×236 is a universal mandatory pixel dimension.

If the form you are using specifically requires another width and height, use the tool's custom-size controls instead of automatically keeping the default profile.

How to Use the Tool Above for an SSC CHT/JHT Signature

1. Check the instruction first. Before processing the file, identify the signature size shown in the notification or application interface you are actually using.
2. Upload the original signature. Select the clearest available source image rather than repeatedly editing an already compressed copy.
3. Review the detected handwriting. Make sure the beginning, ending and lower or upper strokes of the signature remain visible.
4. Use the appropriate dimensions. Keep the 6×2 profile only when it matches the requirement you need. If an application explicitly asks for another size, use the available custom-size option.
5. Check the final JPG. Confirm the dimensions, file size and complete signature in the result preview instead of judging the result only by its KB value.
6. Compare it with the SSC instruction again. Download the JPG only after confirming that the output matches the requirements of the form you intend to use.

The processing is performed locally in the browser, so the selected signature image does not need to be uploaded to the website's server for processing.

Is 709×236 Pixels the Official SSC JHT Signature Size?

No. It should not be described that way.

Approximately 709×236 pixels is what a 6 cm × 2 cm image becomes when converted at 300 DPI:

6 cm × 2 cm at 300 DPI ≈ 709 × 236 pixels.

Similarly:

4 cm × 2 cm at 300 DPI ≈ 472 × 236 pixels.

Those pixel values are conversions. They should not be confused with an explicit SSC statement requiring one exact pixel count unless the application itself gives such a pixel requirement.

If you want to understand the relationship between centimetres, pixels and DPI in more detail, see the SSC signature dimension converter guide.

10–20 KB vs 10–18 KB: What Is the Difference?

For the Combined Hindi Translators Examination 2026 notice, the stated signature file-size range is 10 KB to 20 KB.

The tool above uses 10–18 KB as its generated JPG safety range for the default profile. This is intentionally inside the broader 10–20 KB limit.

Therefore:

• 10–20 KB = the range stated in the SSC CHT/JHT 2026 notification.
• 10–18 KB = the tool's current safety target inside that permitted range.

A candidate should not conclude that a 19 KB file is automatically invalid merely because the tool targets up to 18 KB. At the same time, a file being 15 KB does not automatically mean it is suitable. The signature can still be blurred, miniature, incorrectly cropped or distorted.

Why Signature Clarity Matters as Much as File Size

The 2026 notification specifically refers to blurred or miniature signatures. This matters because aggressive compression or excessive surrounding blank space can produce a technically small file that is visually poor.

For example, a 14 KB JPG may fit comfortably inside the file-size limit but still be unsuitable if the actual handwriting occupies only a tiny area of the image.

When checking the result, look for:

• the complete signature rather than a cropped beginning or ending;
• natural handwriting proportions;
• clear visible strokes;
• correct horizontal orientation;
• the required JPG/JPEG format;
• the appropriate dimensions and KB range.

If you have already created a file that is technically correct but still fails during upload, read the guide on why an SSC signature upload may be rejected.

What About the Aadhaar-Based Authentication Exception?

The main 2026 notification also contains an important Aadhaar-related provision. It states that applications submitted through the Aadhaar Based Authentication process will not be rejected on the stated blurred/miniature signature grounds.

This should not be interpreted as a reason to intentionally ignore the upload instructions.

The safer approach remains to prepare a valid, readable JPEG/JPG file that the application system can accept successfully. Aadhaar authentication and image-file preparation are separate considerations.

What If You Already Submitted a 4×2 or 6×2 Signature?

If your 2026 application has already been submitted, do not assume from an article on the internet that your candidature has automatically been rejected.

The 2026 application deadline and correction period have already passed. Your actual application status and any official communication from SSC are more relevant than trying to recreate the file after submission.

If SSC provides a specific re-upload, correction or document-related instruction, follow that official instruction. Do not make an unsupported change simply because another website uses a different dimension.

Why Many Websites Give Only One Answer

Most signature-size pages try to provide a simple value because a single number is easier to present. The problem is that SSC signature requirements can vary between examinations and notification cycles, and even an official PDF can contain inconsistent wording, as the CHT 2026 example demonstrates.

That is why statements such as “every SSC signature must always be 6×2 cm” or “every SSC form uses 4×2 cm” are too broad.

The purpose of the tool above is not to replace an SSC notification. It is to prepare the image after you know which dimensions and file-size limit your application requires.

Before Uploading: A Better Final Check

Before submitting a signature to an SSC application, compare three things instead of checking only one number:

1. Source requirement: What does the applicable SSC notice or portal actually say?

2. Technical output: Does the downloaded JPG have the required dimensions, format and file size?

3. Visual quality: Is the complete signature clearly visible, naturally proportioned and correctly oriented?

You can also use the SSC signature upload checklist before the final upload.

If your original signature is in PNG format while the application requires JPG/JPEG, see the guide to convert an SSC signature from PNG to JPG.

Frequently Asked Questions

What is the SSC JHT signature size for 2026?

The main application instructions in the SSC Combined Hindi Translators Examination 2026 notification specify JPEG/JPG, 10–20 KB and approximately 6.0 cm × 2.0 cm. However, a later application-procedure section in the same PDF mentions approximately 4.0 cm × 2.0 cm, so the official document contains conflicting dimension references.

Should I use 6×2 cm or 4×2 cm?

Use the requirement displayed for the application you are actually completing. For the 2026 CHT notification, paragraph 8.7 in the main instructions states about 6×2 cm, while a later annexure mentions 4×2 cm. Do not treat either measurement as a permanent rule for every future SSC examination.

Is 709×236 pixels compulsory for SSC JHT?

No. Approximately 709×236 pixels is the 300-DPI conversion of a 6×2 cm image. The CHT 2026 main instruction states the physical measurement in centimetres rather than making 709×236 a universal mandatory pixel count.

Why does the tool make a 10–18 KB file if SSC says 10–20 KB?

The official CHT/JHT 2026 range is 10–20 KB. The tool uses a 10–18 KB safety target inside that broader range. The 18 KB ceiling is a tool-processing choice, not a claim that SSC changed its official maximum to 18 KB.

Can I upload a PNG signature for SSC CHT/JHT?

The 2026 notification asks for JPEG/JPG. The tool above prepares the processed result in JPG/JPEG format.

Final Takeaway

The SSC CHT/JHT signature size 2026 cannot be explained responsibly by copying a single number from a random web page.

The official Combined Hindi Translators Examination 2026 notification itself contains two dimension references: about 6×2 cm in the main application instructions and about 4×2 cm in a later application-procedure section. The consistent parts are the JPEG/JPG format and 10–20 KB file-size range.

When an active application gives an exact requirement, follow that requirement. Then use the tool above to prepare the image, review the complete handwriting, verify the output and download the final JPG.

Most importantly, do not stretch, distort or unnecessarily modify a natural signature just to match a number. Technical dimensions and KB matter, but the final signature must also remain complete and readable.

SSC Signature Resize is an independent browser-based image utility. It is not affiliated with, endorsed by, sponsored by or operated by the Staff Selection Commission or the Government of India. Always verify application requirements through the official SSC website before submission.

 

SSC MTS Signature Size: 6×2 cm, 10–20 KB JPG Guide

If you are preparing a signature for the SSC Multi-Tasking Staff or Havaldar application, it is easy to get confused by different sizes and pixel values published across the internet.

Some pages recommend 4×2 cm. Others publish 140×60, 240×80 or another fixed pixel value. You may also see 709×236 pixels described as if SSC itself requires that exact number.

The safest approach is simpler: start with the actual SSC instruction and separate the official requirement from technical conversion examples.

The SSC MTS notice verified for this guide specifies a scanned signature in JPEG/JPG format, with a file size of 10–20 KB and image dimensions of about 6.0 cm wide × 2.0 cm high. It also warns against blurred or miniature signatures.

The tool above is well suited to that requirement because its default output uses a 6×2 cm landscape frame and creates a JPG/JPEG result while allowing you to inspect the signature crop before downloading.

Quick Answer:

For the SSC MTS notice verified for this guide, prepare the signature as:

Format: JPEG/JPG
File size: 10–20 KB
Image dimensions: about 6.0 cm × 2.0 cm
Shape: approximately 3:1 landscape

The tool above currently uses 709×236 pixels for its 6×2 cm default. That pixel value is a practical 300-DPI conversion of 6×2 cm, but it should not be described as an exact SSC MTS pixel requirement unless the applicable application itself states those pixels.

What Is the SSC MTS Signature Size?

The applicable SSC MTS notice checked for this guide gives the signature requirement as:

• about 6.0 cm width;
• about 2.0 cm height;
• JPEG/JPG format;
• 10 KB to 20 KB file size.

The notice also warns against blurred or miniature signatures that do not meet the stated requirements.

These are the values to distinguish from old, unrelated or generic signature specifications found on third-party websites.

Does the Same Signature Requirement Apply to MTS and Havaldar?

The SSC notice covers the Multi-Tasking (Non-Technical) Staff and Havaldar examination together.

The signature-upload instruction appears as part of the application instructions for that examination.

So when preparing the signature for that applicable MTS/Havaldar application, use the requirement shown in the notice and application portal rather than searching for a separate unofficial Havaldar signature size.

Why 6×2 cm Is a 3:1 Signature Shape

Aspect ratio describes the relationship between width and height.

For 6×2 cm:

6 ÷ 2 = 3

So the intended landscape shape is approximately:

3:1

The signature frame is therefore around three times wider than it is tall.

This matters because using a completely different ratio can change the framing of the handwriting.

Is 709×236 Pixels the Official SSC MTS Signature Size?

No exact 709×236 pixel requirement is stated in the MTS signature clause checked for this guide.

The official instruction gives the physical dimensions in centimetres.

709×236 pixels is useful because it is approximately what 6×2 cm becomes at 300 DPI.

The mathematical conversion is:

Pixels = centimetres ÷ 2.54 × DPI

At 300 DPI:

6 cm:
6 ÷ 2.54 × 300 ≈ 709 pixels

2 cm:
2 ÷ 2.54 × 300 ≈ 236 pixels

So:

6×2 cm at 300 DPI ≈ 709×236 pixels.

That makes 709×236 a technically useful conversion example, but not an official pixel mandate unless the live SSC application gives that exact value.

Does SSC MTS Require 300 DPI?

The MTS signature clause verified for this guide specifies JPEG/JPG, 10–20 KB and about 6×2 cm.

It does not state a separate 300-DPI requirement in that signature instruction.

Therefore, do not present 300 DPI as an official MTS requirement simply because it is useful for converting centimetres into pixels.

The correct distinction is:

6×2 cm is part of the verified MTS signature specification.

709×236 at 300 DPI is a mathematical digital representation of that physical size.

Why Do Some Websites Show 240×80 Pixels?

240×80 pixels has a 3:1 aspect ratio, so its shape is consistent with a 6×2 frame.

However, ratio compatibility does not make it an official SSC MTS pixel requirement.

If SSC states centimetres but does not state exact pixels, a third-party site should not automatically label its chosen pixel dimensions as official.

Use exact pixels when the application gives them. Otherwise, treat pixel values as technical representations of the required shape.

Why Do Some Pages Still Show 4×2 cm?

Signature specifications can change between examinations and notification cycles.

Old pages can remain indexed in search results long after another specification has been issued.

A 4×2 cm frame has a 2:1 ratio.

A 6×2 cm frame has a 3:1 ratio.

Those are meaningfully different shapes.

Do not select 4×2 merely because an old MTS article appears in search results. Follow the MTS notice and application you are actually using.

Why the Tool Above Matches the Verified MTS Shape

The tool above currently opens with:

• 709 × 236 pixels;
• 6 cm × 2 cm;
• JPG/JPEG output;
• a generated JPG safety ceiling of approximately 10–18 KB.

The 6×2 cm shape matches the applicable MTS signature dimensions verified for this guide.

The tool's 10–18 KB safety target also remains inside the official 10–20 KB range.

However, remember the distinction:

• SSC range: 10–20 KB
• tool safety target: approximately 10–18 KB

The narrower tool range is a processing choice designed to leave some room below the upper boundary. It is not a separate SSC rule.

Do You Need to Use Custom Size for SSC MTS?

For the MTS requirement verified in this guide, the current 6×2 cm default already uses the appropriate landscape shape.

You therefore do not need to change dimensions merely for the sake of changing them.

But always look at the application you are filling.

If your live MTS application gives different dimensions or another maximum KB value, use the Custom controls in the tool above.

The form you are actually submitting is the final authority.

What the Official MTS Signature Clause Does Not Say

The signature instruction checked for this guide does not specify an exact pixel width and height.

It also does not state 300 DPI as a separate mandatory signature requirement in that clause.

No pen-colour requirement is stated in that signature clause either.

This is important because third-party websites sometimes turn their preferred workflow into an “official” rule.

Do not do that.

If the live application provides an additional instruction, follow it. Otherwise, avoid inventing requirements that are not present in the applicable SSC instructions.

Do Not Digitally Recolour the Signature

If an application gives an ink-colour instruction, the safest approach is to create a fresh original signature using the requested pen colour.

Do not digitally recolour an existing signature merely to imitate another ink colour.

The tool above is designed to preserve the original source appearance rather than recolour the handwriting.

SSC MTS Photograph and Signature Are Different

Do not mix the MTS photograph instructions with the signature instructions.

The application workflow uses live photograph capture instructions for the candidate's photo.

The signature is a separate scanned-image upload.

Therefore, do not apply photograph dimensions, photograph capture rules or photograph file-size values to the signature.

How to Prepare an SSC MTS Signature with the Tool Above

1. Start with the Clearest Original

Use the best source image available.

Good options include:

• the original phone photograph;
• the original scan;
• a clear JPG;
• a clear PNG;
• a clear WebP source;
• a suitable single-page PDF containing the signature.

Avoid beginning with a tiny screenshot or an image that has already been compressed several times.

2. Upload the Signature

Select the signature source in the tool above.

The tool reads the file locally inside your browser.

The Original preview will appear so you can inspect the source before downloading a processed version.

3. Check Whether the Source Is Clear

Before focusing on KB or pixels, look at the actual handwriting.

Check:

• the first stroke;
• the last stroke;
• small dots;
• loops;
• underlines;
• thin finishing marks.

If the original itself is badly blurred, resizing cannot reconstruct detail that was never captured.

Use a clearer photograph or scan.

4. Let Smart AutoDetect Find the Signature

Smart AutoDetect analyses the visible handwriting region and prepares an initial crop.

This is especially useful when the signature occupies only a small part of a larger phone photograph.

Automatic detection saves time, but it should not replace your own visual check.

5. Review the Original Preview

Look at all four sides of the crop.

Make sure the frame includes:

• the complete beginning;
• the complete ending flourish;
• all genuine dots;
• upper loops;
• lower strokes;
• any real underline.

6. Adjust the Crop If Necessary

If a genuine stroke is too close to an edge, use the crop lines or handles directly in the Original preview.

Move the boundary outward slightly.

Do not make the crop so tight that ink touches every image edge.

Keep a small amount of natural source background around the complete handwriting.

7. Avoid Excessive Blank Space

Keeping the whole sheet of paper is not safer.

Too much unused background can make the actual signature appear miniature when the source is reduced into the final 6×2 frame.

The goal is a balanced crop:

complete handwriting + small safety margin + little unnecessary distant background.

8. Rotate Only When Necessary

If the complete source appears sideways, use the Rotate Signature control.

Do not rotate a naturally slanted handwritten signature merely because some letters rise slightly.

After rotation, inspect the crop again because the source position has changed.

9. Keep the 6×2 Output When It Matches Your Form

The current default 6×2 cm frame corresponds to the applicable MTS requirement verified for this guide.

You can therefore use the default when it matches the instructions shown in your application.

If your actual form displays something different, switch to Custom values instead.

10. Check the File Size

The official MTS requirement checked for this guide uses a 10–20 KB JPEG/JPG.

The tool normally prepares its default output inside a narrower safety range below the 20 KB upper boundary.

Always inspect the final file-size value shown in the Result section.

11. Review the Result Preview

Do not rely only on a “processed” status.

Look at the final signature and confirm:

• it is complete;
• it is not miniature;
• it is not badly blurred;
• it has not been stretched;
• it remains naturally proportioned;
• the selected dimensions are correct;
• the file size is inside the applicable range.

12. Download and Verify the JPG

Download the processed JPG.

Open it once in your normal gallery or image viewer.

Then compare it with the signature requirement shown in your MTS application before uploading.

Why a 15 KB File Can Still Be Wrong

File size is only one technical property.

A 15 KB signature can still be:

• blurred;
• miniature;
• cropped;
• sideways;
• distorted;
• the wrong dimensions.

Do not treat a green KB number as proof that every other requirement is correct.

Why 709×236 Can Still Be Wrong

The same principle applies to pixel dimensions.

A file can be exactly 709×236 pixels while the handwriting inside it is:

• too small;
• cut off;
• blurry;
• sideways;
• unnaturally stretched.

Technical canvas size and visual signature quality must both be checked.

Why You Should Not Stretch the Signature to Fill 6×2 cm

A 6×2 frame does not mean the handwriting should be stretched until it touches both sides.

Stretching can make the signature:

• unnaturally wide;
• too thin;
• distorted compared with the original.

The tool above uses proportional fitting so the handwriting keeps its natural shape.

What If Your Signature Is Naturally Short?

Some people have compact signatures.

That does not mean the handwriting should be artificially widened.

Use a safe crop around the complete natural signature and allow proportional fitting to place it inside the output frame.

The purpose of the 6×2 image is to provide the required canvas, not to redesign your handwriting.

What If Your Signature Is Very Long?

A long signature may need careful cropping because the first and final strokes can be far apart.

Do not cut the ending flourish simply to make the signature look larger.

Keep the complete handwriting inside the source crop and let it fit proportionally inside the landscape frame.

What If the Signature Has a Long Underline?

If the underline is genuinely part of your usual signature, treat it as part of the handwriting.

Check:

• where the underline starts;
• where it ends;
• its lowest point.

Make sure the crop includes it completely.

What If a Dot or Thin Stroke Is Missing?

Compare the crop with the Original preview.

If the missing mark exists in the original, move the relevant crop boundary outward.

If the source itself never captured the mark clearly, use a better original rather than digitally drawing the stroke back into the image.

Do Not Redraw Missing Handwriting

Image resizing should format your existing signature, not create a new one.

If a real stroke has disappeared because of cropping, correct the crop.

If the original source itself is incomplete, use another source.

Do not redraw or digitally reconstruct the signature.

Do Not Whiten the Background Just to Make It Look Cleaner

Changing the original background does not automatically make the signature more compliant.

The tool above preserves the selected source pixels and natural background rather than automatically replacing them with an artificial white background.

This keeps the processing focused on the original signature image.

Why the Tool Does Not Artificially Sharpen the Signature

Artificial sharpening cannot recover handwriting detail that was never captured by the camera or scanner.

Strong filters can also create halos or unnatural stroke edges.

If your original source is badly blurred, the better solution is to capture a clearer source.

What Processing Does the Tool Actually Perform?

The tool above is designed around a practical signature-preparation workflow:

• read the original source;
• correct source orientation where necessary;
• detect the visible handwriting region;
• prepare a safe crop;
• allow crop correction in the Original preview;
• fit the handwriting proportionally;
• resize to the selected output dimensions;
• encode the result as JPG/JPEG;
• compress the result;
• validate the output information;
• generate the downloadable JPG.

It does not intentionally whiten, recolour, redraw, stretch or cosmetically redesign the signature.

Why Local Browser Processing Is Useful

A handwritten signature is personal information.

The normal processing workflow on SSC Signature Resize runs locally inside your browser.

The selected source does not need to be uploaded to the website server merely for normal cropping, resizing and compression.

You should still use a trusted device and keep the downloaded image securely stored.

More information is available in the Privacy Policy.

What About the Aadhaar Authentication Wording in the MTS Notice?

The MTS notice checked for this guide contains an Aadhaar-based authentication exception relating to rejection on the stated photograph/signature-standard grounds.

That wording should not be interpreted as a reason to intentionally ignore the signature specification.

The same notice still states the JPEG/JPG, 10–20 KB and approximately 6×2 cm signature requirement.

The practical approach is straightforward: prepare the signature to the stated specification and follow the application instructions presented to you.

Common SSC MTS Signature Mistakes

Mistake	Why It Can Be a Problem	Better Approach
Using an old 4×2 cm recommendation	It does not match the applicable 6×2 MTS instruction checked for this guide	Follow the applicable MTS notice and portal
Calling 709×236 an official SSC pixel rule	The MTS clause gives centimetres, not those exact pixels	Describe 709×236 as a technical 300-DPI conversion example
Calling 300 DPI mandatory	That requirement is not stated in the verified MTS signature clause	Use the official values actually shown in the applicable instruction
Using a tiny signature with large blank margins	The result can appear miniature	Use a safe crop around the complete handwriting
Cropping directly against the ink	A dot or finishing stroke can disappear	Keep a small natural margin
Stretching handwriting to fill the frame	The signature becomes distorted	Use proportional fitting
Using photograph specifications for the signature	Photo and signature requirements are separate	Use the signature-specific instruction
Using an already blurred source	Resizing cannot recreate lost handwriting detail	Start with a clearer original photo or scan

Complete SSC MTS Signature Workflow

1. Open the applicable SSC MTS application instructions.
2. Confirm that the signature requirement shown to you matches the values you intend to use.
3. Start from the clearest original signature source.
4. Upload the source to the tool above.
5. Inspect the Original preview.
6. Confirm that the handwriting is clear.
7. Let Smart AutoDetect identify the signature region.
8. Check the beginning of the signature.
9. Check the final flourish.
10. Check dots, loops and underlines.
11. Adjust crop lines or handles if necessary.
12. Keep a small natural safety margin.
13. Remove excessive distant blank background.
14. Rotate only when the whole source is incorrectly oriented.
15. Review the crop again after rotation.
16. Use the 6×2 cm default when it matches your applicable MTS instructions.
17. Use Custom values if your live form gives different dimensions.
18. Allow the processed result to refresh after every change.
19. Check that the output is JPG/JPEG.
20. Check the final dimensions.
21. Check the final file size.
22. Confirm that the result is inside the applicable KB range.
23. Confirm that the signature is not miniature.
24. Confirm that the signature is not badly blurred.
25. Confirm that no genuine stroke has been cut.
26. Download the JPG.
27. Open the downloaded image once.
28. Compare it with the MTS application instructions before final submission.

Final SSC MTS Signature Checklist

• The applicable MTS instructions have been checked.
• The output is a genuine JPEG/JPG.
• The final file size is inside the applicable 10–20 KB range.
• The signature frame follows the approximately 6×2 cm requirement when that is what the form specifies.
• The overall shape is approximately 3:1.
• 709×236 is treated as a conversion example rather than an invented official pixel rule.
• 300 DPI is not being falsely presented as an MTS requirement unless the application explicitly states it.
• The complete first stroke is visible.
• The final flourish is visible.
• Dots remain visible.
• Underlines remain complete.
• The signature has a small natural safety margin.
• There is not excessive blank background.
• The signature does not appear miniature.
• The signature is not badly blurred.
• The handwriting has not been stretched.
• The source background has not been unnecessarily replaced.
• The downloaded JPG has been opened and checked.
• The final application preview has been reviewed before submission.

Frequently Asked Questions

What is the SSC MTS signature size?

The MTS notice verified for this guide specifies a scanned signature in JPEG/JPG format, 10–20 KB, with image dimensions of about 6.0 cm wide × 2.0 cm high.

What is the SSC MTS signature file size?

The applicable MTS instruction checked for this guide specifies a 10–20 KB JPEG/JPG signature.

Is SSC MTS signature 6×2 cm or 4×2 cm?

The MTS notice verified for this guide uses about 6×2 cm. Older or third-party pages may show another size, so always confirm the requirement in the MTS application you are actually completing.

What is SSC MTS 6×2 cm in pixels?

There is no single pixel answer without choosing a resolution. At 300 DPI, 6×2 cm converts mathematically to approximately 709×236 pixels.

Is 709×236 the official SSC MTS pixel size?

The MTS signature clause checked for this guide does not state 709×236 as an exact pixel requirement. It is a mathematical representation of approximately 6×2 cm at 300 DPI.

Does SSC MTS require 300 DPI?

The verified MTS signature clause specifies JPEG/JPG, 10–20 KB and about 6×2 cm but does not state a separate mandatory 300-DPI requirement in that clause.

Is 240×80 the official MTS signature size?

240×80 has a 3:1 shape, but the MTS instruction checked for this guide gives physical dimensions rather than that exact pixel value. Do not label a third-party pixel choice as official unless SSC itself states it.

Why does the tool use 709×236?

The tool uses 709×236 as a practical digital representation of approximately 6×2 cm. At 300 DPI, 6×2 cm converts to roughly those pixel dimensions.

Why does the tool target approximately 10–18 KB instead of 20 KB?

The narrower range is a tool-side safety target that remains inside the official 10–20 KB range. It is not a separate SSC requirement.

Should my MTS signature be exactly 20 KB?

No. When the requirement is 10–20 KB, the final file needs to remain inside that range. It does not need to be exactly 20 KB.

Should my MTS signature be exactly 10 KB?

No. Ten kilobytes is the lower boundary of the stated range, not a target that every file must match exactly.

Can a 15 KB MTS signature still be wrong?

Yes. Correct file size does not guarantee correct dimensions, crop, clarity or handwriting coverage.

Can I use a phone photo for the MTS signature?

A clear phone photograph can be used as a source for the tool. Keep the signature in focus, capture every stroke and leave enough natural paper for safe cropping.

Can I use PNG as the source?

The tool above accepts supported raster source formats and prepares the processed result as JPG/JPEG.

Can I use a PDF signature?

A suitable single-page PDF can be used as a source. If you have a clearer original raster image, using that original may avoid an unnecessary conversion step.

Does the MTS signature have to use a specific pen colour?

The MTS signature clause verified for this guide does not state a pen-colour requirement. If your live application presents an additional instruction, follow that instruction rather than relying on an unsupported third-party claim.

Does Aadhaar authentication mean I can ignore the signature specification?

The notice includes an Aadhaar-authentication exception relating to rejection on the stated standards, but it still provides the signature specification. The practical approach is to prepare the file according to the stated requirement and follow the application instructions.

Does the tool whiten the signature background?

No. The tool is designed to preserve the selected original pixels and natural background instead of automatically whitening or replacing the source background.

Does the tool stretch the signature to fill 6×2 cm?

No. The processing is designed to fit the selected source proportionally rather than intentionally distorting the handwriting.

Is my signature uploaded to the website server?

The normal processing workflow is designed to run locally inside your browser, so the selected image does not need to be sent to the website server for standard signature preparation.

More SSC Signature Help

Use the SSC Signature Resize tool above to prepare the MTS signature from your clearest original source.

Before submitting the file, review the SSC signature upload checklist to check file size, crop and image quality.

If your signature still fails during upload, see the guide explaining common reasons an SSC signature may be rejected.

If your original source is PNG, follow the PNG to JPG signature conversion guide instead of simply renaming the file extension.

You can also browse more SSC signature guides and signature resizing guides.

For details about browser-based processing, read the Privacy Policy. More information about the independent utility is available on the About Us page.

Conclusion

For the SSC MTS notice verified for this guide, the signature requirement is straightforward once centimetres, pixels and KB are kept separate.

The official instruction uses a scanned JPEG/JPG signature of 10–20 KB with dimensions of about 6.0 cm × 2.0 cm.

That 6×2 shape is approximately 3:1.

The tool above currently uses 709×236 pixels for its 6×2 cm default. This is a useful digital representation because 6×2 cm converts to approximately 709×236 pixels at 300 DPI. However, those exact pixels and 300 DPI should not be falsely presented as an official MTS requirement when the applicable signature clause does not state them.

The safest workflow is to start with the clearest original source, let the tool detect the handwriting, review the crop yourself, preserve every genuine stroke, keep a small natural safety margin and verify the final JPG before uploading it.

Do not stretch a short signature, cut a long flourish, digitally recolour the handwriting or replace the natural source background merely to imitate a third-party example.

Most importantly, always compare the final file with the instructions shown in the SSC MTS application you are actually submitting. Requirements can change, and the active SSC application or notification remains the final authority.

SSC Signature Resize is an independent browser-based image utility and is not affiliated with, endorsed by, sponsored by or operated by the Staff Selection Commission or the Government of India.

SSC Stenographer Signature Size: About 6×2 cm, 10–20 KB

 

Quick answer: For the SSC Stenographer application, the scanned signature should be in JPEG/JPG format, within 10–20 KB, and the signature image should be about 6.0 cm wide × 2.0 cm high according to the current Staff Selection Commission instructions. A blurred, illegible or miniature signature can create a rejection risk.

The signature resizing tool above can help prepare the image without requiring you to calculate compression settings manually. However, it is important to understand which measurements come from SSC and which measurements are only technical values used by an image-resizing tool. This guide explains that difference so you do not accidentally follow an outdated pixel size found elsewhere on the internet.

SSC Stenographer Signature Size at a Glance

Requirement	SSC Stenographer guidance
Signature format	JPEG/JPG
File size	10–20 KB
Approximate image size	6.0 cm width × 2.0 cm height
Orientation	Horizontal / landscape shape
Quality	Clear and legible; avoid blurred or miniature appearance
Official pixel size	No mandatory pixel dimension is stated in the cited Stenographer signature instruction

Important: The wording used by SSC is about 6.0 cm × 2.0 cm. It should therefore not be rewritten as an invented mandatory pixel specification. Always compare your final file with the instructions shown in the application form and the applicable SSC notification before submitting it.

What Does SSC Actually Require for the Stenographer Signature?

The key requirement is straightforward: the applicant has to prepare a scanned signature in JPEG/JPG format, keep the file within the stated 10–20 KB range, and use an image measuring about 6.0 cm in width and 2.0 cm in height.

Quality matters as much as file size. Making a file exactly 15 KB does not make it suitable if the handwriting has become blurry, an important stroke has been cropped, or the signature has been reduced so much that it appears miniature.

This is why a useful signature resizer should do more than simply compress an image. You should be able to inspect the handwriting, check the crop and verify the final output before downloading it.

Is 140×60 Pixels the Official SSC Stenographer Signature Size?

No mandatory 140×60 pixel specification appears in the current SSC Stenographer signature instruction discussed here.

You may still find 140×60 px on old guides, generic exam-image websites or pages that combine requirements from several recruitment systems. Other pages may show 200×80 px, 236×79 px or another pixel size.

The problem is that a pixel value shown by a third-party tool is not automatically an official SSC Stenographer rule.

For this examination, the important distinction is:

• SSC requirement: about 6.0 cm × 2.0 cm, JPEG/JPG, 10–20 KB.
• Technical resizer value: a tool may represent that physical size using a particular number of pixels depending on its processing profile.

If the live SSC application screen gives an additional exact pixel requirement, follow that instruction. Otherwise, do not replace the official centimetre guidance with an unrelated pixel number simply because another website calls it standard.

Why Does the Tool Above Show 709×236 Pixels?

The 6×2 cm output profile currently used by the tool above is represented as 709×236 pixels. This is the tool's technical output profile for preparing a landscape signature at that selected physical proportion.

709×236 pixels should not be described as a mandatory SSC Stenographer pixel rule. SSC's stated Stenographer instruction is about the physical dimensions, file format and KB range rather than prescribing 709×236 pixels in that clause.

This distinction is useful because it prevents a common SEO and application-form mistake: converting a measurement into pixels and then presenting the conversion as if SSC itself published that exact pixel value.

How to Resize an SSC Stenographer Signature Using the Tool Above

1. Start with the clearest source available

Use a clean signature image in which every important handwriting stroke is visible. A proper scan is the safest source when the instruction asks for a scanned signature.

If you only have a phone-captured image available for preparation, make sure it is sharp, evenly lit, straight and free from strong shadows. The final result should still look like your real signature rather than a digitally redrawn version.

2. Upload the signature to the tool above

Select the signature image using the upload control. The website processes the selected image inside the browser, so the normal resizing workflow does not require the signature image to be sent to the site's server.

3. Review Smart AutoDetect carefully

The tool analyses the visible handwriting and prepares an initial crop. Automatic detection is useful, but no automatic crop should be accepted without inspection.

Check the beginning of the signature, the ending flourish, dots, upper strokes and lower strokes. Nothing important should touch or cross the crop boundary.

4. Adjust the crop directly on the Original Preview if required

If extra blank area remains or a handwriting stroke is too close to the edge, use the crop lines or handles directly on the Original Preview.

Do not crop so aggressively that the signature becomes incomplete. At the same time, leaving a very large empty area around a small signature can make the handwriting appear miniature after resizing.

5. Correct the orientation if necessary

If the source appears sideways, use the rotation control and inspect the refreshed preview. A signature intended for an approximately 6×2 cm frame should appear naturally horizontal rather than being forced into an awkward vertical layout.

6. Use the 6×2 cm output when it matches your SSC instruction

The default 6×2 cm profile of the tool above is suitable for the Stenographer requirement discussed in this guide because SSC states that the signature image should be about 6.0 cm wide and 2.0 cm high.

If your actual application screen or a different notification gives another requirement, use the available custom width, height and maximum-KB controls instead of assuming that one setting applies to every SSC form.

7. Check the generated JPG

After processing, inspect the Result section. Confirm that the complete signature is visible, the output is JPG/JPEG, and the displayed file size is within the required range.

Open the downloaded image once before uploading it to SSC. The handwriting should remain recognisable and should not look stretched, squeezed, blurred or excessively small.

Why Does This Tool Target 10–18 KB When SSC Allows 10–20 KB?

The official Stenographer requirement allows a signature file from 10 KB to 20 KB. The tool above currently uses a 10–18 KB generated-file safety ceiling.

That 10–18 KB target is a setting of this website, not a separate SSC rule. A file within 10–18 KB also remains inside the stated 10–20 KB SSC range.

You should therefore remember the difference:

• SSC's stated range: 10–20 KB.
• This tool's generated target: 10–18 KB.

Do not tell applicants that SSC officially requires 10–18 KB. It does not replace the 10–20 KB requirement.

Blurred and Miniature Signatures: What Do These Terms Mean?

Blurred signature

A blurred signature has lost visible handwriting detail. Compression cannot restore handwriting information that was already missing in the original image.

If the source itself is badly out of focus, the safer solution is to create a clearer source rather than repeatedly compressing, sharpening or digitally altering it.

Miniature signature

A miniature signature can occur when the handwriting occupies only a small part of a large canvas. After the entire canvas is resized, the actual signature may become unnecessarily tiny.

A sensible crop removes excessive surrounding background while preserving the complete signature. The goal is not to make the handwriting artificially larger; it is to use the available image area efficiently without cutting strokes.

For a broader pre-submission check, you can also use the SSC signature upload checklist.

Do Not Stretch the Signature Just to Match the Dimensions

Changing the canvas dimensions and stretching the handwriting are not the same thing.

A signature should continue to resemble the original. If handwriting is squeezed horizontally or stretched vertically simply to fill the frame, the result may look unnatural and harder to recognise.

The tool is designed to work from the original image pixels and crop the source appropriately rather than redrawing the signature. The original visual appearance and background should remain natural wherever possible.

Should You Whiten the Background or Darken the Ink?

Avoid unnecessary visual editing when the original signature is already readable.

Artificial whitening, recolouring, redrawing or aggressive sharpening can change the appearance of the source. A cleaner approach is to begin with a good-quality original and perform only the crop, resize and compression needed for the application.

If a particular SSC instruction specifies an additional condition such as an ink colour, follow that instruction from the official application material. Do not assume an ink-colour rule merely because a third-party website mentions one.

What If Your Original Signature Is PNG?

The SSC Stenographer requirement discussed here calls for JPEG/JPG output. If your source is PNG, it can be used as an input for preparation, but the final file should be checked in JPG/JPEG format before submission.

If you need more detail about this conversion, read the PNG to JPG SSC signature guide.

Common SSC Stenographer Signature Upload Mistakes

• Following an old 140×60 px recommendation without checking the current Stenographer instructions.
• Assuming every SSC examination uses exactly the same signature dimensions.
• Uploading a file below 10 KB or above 20 KB.
• Uploading PNG when the applicable instruction requires JPEG/JPG.
• Leaving so much empty background that the actual handwriting becomes miniature.
• Cropping away the first stroke, last stroke, dot or flourish.
• Starting from an already blurred source.
• Stretching the handwriting merely to fill the output frame.
• Confusing photograph dimensions with signature dimensions.
• Trusting a third-party preset without comparing it with the live SSC requirement.

If your image appears correct but the SSC portal still does not accept it, see the guide explaining possible reasons an SSC signature upload may be rejected.

Final SSC Stenographer Signature Checklist

Before uploading your prepared signature, check each point below:

• The complete handwriting is visible.
• The image is not blurry.
• The signature does not look miniature.
• The output is JPEG/JPG.
• The file is within the applicable 10–20 KB range.
• The image is approximately 6.0 cm wide × 2.0 cm high when following the Stenographer requirement covered here.
• The signature has not been unnaturally stretched or squeezed.
• No important handwriting stroke has been cropped.
• The final downloaded file has been opened and visually checked.
• The live SSC application instructions have been checked once more before submission.

A Note About Aadhaar-Based Authentication

The applicable SSC Stenographer instructions contain an exception stating that the specified rejection grounds do not apply in the same way to applications submitted through Aadhaar Based Authentication.

That should not be treated as a reason to upload a poor-quality image. Preparing a clear signature that follows the stated format, size and dimensions remains the sensible approach and avoids unnecessary uncertainty later in the application process.

Does Your Signature Leave Your Device?

For the normal tool workflow on this website, cropping, resizing and compression take place locally in your browser. The selected signature therefore does not need to be uploaded to the website's server for processing.

You can read more about how the website handles information in the Privacy Policy.

Frequently Asked Questions

What is the SSC Stenographer signature size?

The current SSC Stenographer instruction covered here asks for a scanned signature in JPEG/JPG format, within 10–20 KB, with image dimensions of about 6.0 cm width × 2.0 cm height.

Is 140×60 pixels the official SSC Stenographer signature size?

No mandatory 140×60 pixel dimension is stated in the current Stenographer signature instruction discussed here. Some third-party or older guides use that size, but applicants should follow the requirement stated in the applicable SSC notice and live form.

Is 709×236 pixels mandatory for SSC Stenographer?

No. 709×236 px is the technical 6×2 cm output profile currently used by the tool above. It should not be described as an official mandatory SSC Stenographer pixel specification.

Why does the tool produce 10–18 KB when SSC says 10–20 KB?

SSC's stated range is 10–20 KB. This website currently targets 10–18 KB for generated files, which remains inside that range. The 10–18 KB target is a tool setting, not a separate SSC rule.

Can a blurred or miniature SSC Stenographer signature be rejected?

Yes. The applicable SSC instructions specifically warn about blurred, illegible or miniature signatures. Begin with a clear source, keep the complete handwriting visible and inspect the downloaded JPG before submission.

Is my signature uploaded to the website's server when I resize it here?

No. The normal image-processing workflow of the tool above runs locally in the browser, so the selected signature does not need to be uploaded to the website's server for cropping, resizing and compression.

Final Advice

A technically small JPG is not automatically an application-ready signature. The most important goal is to produce a file that meets the applicable SSC requirement while keeping the complete handwriting clear and recognisable.

For SSC Stenographer, use the official requirement as your authority: JPEG/JPG, 10–20 KB and about 6.0 cm × 2.0 cm for the signature covered by this guide. Treat pixel values shown by resizing websites as technical processing values unless SSC itself states that exact pixel dimension for your application.

Disclaimer: SSC Signature Resize is an independent utility and is not affiliated with, endorsed by, sponsored by or operated by the Staff Selection Commission or the Government of India. Examination instructions can change. The applicable SSC notification and live application form remain the final authority before submission.