SSC MTS Signature Size: 6×2 cm, 10–20 KB JPG Guide

If you are preparing a signature for the SSC Multi-Tasking Staff or Havaldar application, it is easy to get confused by different sizes and pixel values published across the internet.

Some pages recommend 4×2 cm. Others publish 140×60, 240×80 or another fixed pixel value. You may also see 709×236 pixels described as if SSC itself requires that exact number.

The safest approach is simpler: start with the actual SSC instruction and separate the official requirement from technical conversion examples.

The SSC MTS notice verified for this guide specifies a scanned signature in JPEG/JPG format, with a file size of 10–20 KB and image dimensions of about 6.0 cm wide × 2.0 cm high. It also warns against blurred or miniature signatures.

The tool above is well suited to that requirement because its default output uses a 6×2 cm landscape frame and creates a JPG/JPEG result while allowing you to inspect the signature crop before downloading.

Quick Answer:

For the SSC MTS notice verified for this guide, prepare the signature as:

Format: JPEG/JPG
File size: 10–20 KB
Image dimensions: about 6.0 cm × 2.0 cm
Shape: approximately 3:1 landscape

The tool above currently uses 709×236 pixels for its 6×2 cm default. That pixel value is a practical 300-DPI conversion of 6×2 cm, but it should not be described as an exact SSC MTS pixel requirement unless the applicable application itself states those pixels.

What Is the SSC MTS Signature Size?

The applicable SSC MTS notice checked for this guide gives the signature requirement as:

• about 6.0 cm width;
• about 2.0 cm height;
• JPEG/JPG format;
• 10 KB to 20 KB file size.

The notice also warns against blurred or miniature signatures that do not meet the stated requirements.

These are the values to distinguish from old, unrelated or generic signature specifications found on third-party websites.

Does the Same Signature Requirement Apply to MTS and Havaldar?

The SSC notice covers the Multi-Tasking (Non-Technical) Staff and Havaldar examination together.

The signature-upload instruction appears as part of the application instructions for that examination.

So when preparing the signature for that applicable MTS/Havaldar application, use the requirement shown in the notice and application portal rather than searching for a separate unofficial Havaldar signature size.

Why 6×2 cm Is a 3:1 Signature Shape

Aspect ratio describes the relationship between width and height.

For 6×2 cm:

6 ÷ 2 = 3

So the intended landscape shape is approximately:

3:1

The signature frame is therefore around three times wider than it is tall.

This matters because using a completely different ratio can change the framing of the handwriting.

Is 709×236 Pixels the Official SSC MTS Signature Size?

No exact 709×236 pixel requirement is stated in the MTS signature clause checked for this guide.

The official instruction gives the physical dimensions in centimetres.

709×236 pixels is useful because it is approximately what 6×2 cm becomes at 300 DPI.

The mathematical conversion is:

Pixels = centimetres ÷ 2.54 × DPI

At 300 DPI:

6 cm:
6 ÷ 2.54 × 300 ≈ 709 pixels

2 cm:
2 ÷ 2.54 × 300 ≈ 236 pixels

So:

6×2 cm at 300 DPI ≈ 709×236 pixels.

That makes 709×236 a technically useful conversion example, but not an official pixel mandate unless the live SSC application gives that exact value.

Does SSC MTS Require 300 DPI?

The MTS signature clause verified for this guide specifies JPEG/JPG, 10–20 KB and about 6×2 cm.

It does not state a separate 300-DPI requirement in that signature instruction.

Therefore, do not present 300 DPI as an official MTS requirement simply because it is useful for converting centimetres into pixels.

The correct distinction is:

6×2 cm is part of the verified MTS signature specification.

709×236 at 300 DPI is a mathematical digital representation of that physical size.

Why Do Some Websites Show 240×80 Pixels?

240×80 pixels has a 3:1 aspect ratio, so its shape is consistent with a 6×2 frame.

However, ratio compatibility does not make it an official SSC MTS pixel requirement.

If SSC states centimetres but does not state exact pixels, a third-party site should not automatically label its chosen pixel dimensions as official.

Use exact pixels when the application gives them. Otherwise, treat pixel values as technical representations of the required shape.

Why Do Some Pages Still Show 4×2 cm?

Signature specifications can change between examinations and notification cycles.

Old pages can remain indexed in search results long after another specification has been issued.

A 4×2 cm frame has a 2:1 ratio.

A 6×2 cm frame has a 3:1 ratio.

Those are meaningfully different shapes.

Do not select 4×2 merely because an old MTS article appears in search results. Follow the MTS notice and application you are actually using.

Why the Tool Above Matches the Verified MTS Shape

The tool above currently opens with:

• 709 × 236 pixels;
• 6 cm × 2 cm;
• JPG/JPEG output;
• a generated JPG safety ceiling of approximately 10–18 KB.

The 6×2 cm shape matches the applicable MTS signature dimensions verified for this guide.

The tool's 10–18 KB safety target also remains inside the official 10–20 KB range.

However, remember the distinction:

• SSC range: 10–20 KB
• tool safety target: approximately 10–18 KB

The narrower tool range is a processing choice designed to leave some room below the upper boundary. It is not a separate SSC rule.

Do You Need to Use Custom Size for SSC MTS?

For the MTS requirement verified in this guide, the current 6×2 cm default already uses the appropriate landscape shape.

You therefore do not need to change dimensions merely for the sake of changing them.

But always look at the application you are filling.

If your live MTS application gives different dimensions or another maximum KB value, use the Custom controls in the tool above.

The form you are actually submitting is the final authority.

What the Official MTS Signature Clause Does Not Say

The signature instruction checked for this guide does not specify an exact pixel width and height.

It also does not state 300 DPI as a separate mandatory signature requirement in that clause.

No pen-colour requirement is stated in that signature clause either.

This is important because third-party websites sometimes turn their preferred workflow into an “official” rule.

Do not do that.

If the live application provides an additional instruction, follow it. Otherwise, avoid inventing requirements that are not present in the applicable SSC instructions.

Do Not Digitally Recolour the Signature

If an application gives an ink-colour instruction, the safest approach is to create a fresh original signature using the requested pen colour.

Do not digitally recolour an existing signature merely to imitate another ink colour.

The tool above is designed to preserve the original source appearance rather than recolour the handwriting.

SSC MTS Photograph and Signature Are Different

Do not mix the MTS photograph instructions with the signature instructions.

The application workflow uses live photograph capture instructions for the candidate's photo.

The signature is a separate scanned-image upload.

Therefore, do not apply photograph dimensions, photograph capture rules or photograph file-size values to the signature.

How to Prepare an SSC MTS Signature with the Tool Above

1. Start with the Clearest Original

Use the best source image available.

Good options include:

• the original phone photograph;
• the original scan;
• a clear JPG;
• a clear PNG;
• a clear WebP source;
• a suitable single-page PDF containing the signature.

Avoid beginning with a tiny screenshot or an image that has already been compressed several times.

2. Upload the Signature

Select the signature source in the tool above.

The tool reads the file locally inside your browser.

The Original preview will appear so you can inspect the source before downloading a processed version.

3. Check Whether the Source Is Clear

Before focusing on KB or pixels, look at the actual handwriting.

Check:

• the first stroke;
• the last stroke;
• small dots;
• loops;
• underlines;
• thin finishing marks.

If the original itself is badly blurred, resizing cannot reconstruct detail that was never captured.

Use a clearer photograph or scan.

4. Let Smart AutoDetect Find the Signature

Smart AutoDetect analyses the visible handwriting region and prepares an initial crop.

This is especially useful when the signature occupies only a small part of a larger phone photograph.

Automatic detection saves time, but it should not replace your own visual check.

5. Review the Original Preview

Look at all four sides of the crop.

Make sure the frame includes:

• the complete beginning;
• the complete ending flourish;
• all genuine dots;
• upper loops;
• lower strokes;
• any real underline.

6. Adjust the Crop If Necessary

If a genuine stroke is too close to an edge, use the crop lines or handles directly in the Original preview.

Move the boundary outward slightly.

Do not make the crop so tight that ink touches every image edge.

Keep a small amount of natural source background around the complete handwriting.

7. Avoid Excessive Blank Space

Keeping the whole sheet of paper is not safer.

Too much unused background can make the actual signature appear miniature when the source is reduced into the final 6×2 frame.

The goal is a balanced crop:

complete handwriting + small safety margin + little unnecessary distant background.

8. Rotate Only When Necessary

If the complete source appears sideways, use the Rotate Signature control.

Do not rotate a naturally slanted handwritten signature merely because some letters rise slightly.

After rotation, inspect the crop again because the source position has changed.

9. Keep the 6×2 Output When It Matches Your Form

The current default 6×2 cm frame corresponds to the applicable MTS requirement verified for this guide.

You can therefore use the default when it matches the instructions shown in your application.

If your actual form displays something different, switch to Custom values instead.

10. Check the File Size

The official MTS requirement checked for this guide uses a 10–20 KB JPEG/JPG.

The tool normally prepares its default output inside a narrower safety range below the 20 KB upper boundary.

Always inspect the final file-size value shown in the Result section.

11. Review the Result Preview

Do not rely only on a “processed” status.

Look at the final signature and confirm:

• it is complete;
• it is not miniature;
• it is not badly blurred;
• it has not been stretched;
• it remains naturally proportioned;
• the selected dimensions are correct;
• the file size is inside the applicable range.

12. Download and Verify the JPG

Download the processed JPG.

Open it once in your normal gallery or image viewer.

Then compare it with the signature requirement shown in your MTS application before uploading.

Why a 15 KB File Can Still Be Wrong

File size is only one technical property.

A 15 KB signature can still be:

• blurred;
• miniature;
• cropped;
• sideways;
• distorted;
• the wrong dimensions.

Do not treat a green KB number as proof that every other requirement is correct.

Why 709×236 Can Still Be Wrong

The same principle applies to pixel dimensions.

A file can be exactly 709×236 pixels while the handwriting inside it is:

• too small;
• cut off;
• blurry;
• sideways;
• unnaturally stretched.

Technical canvas size and visual signature quality must both be checked.

Why You Should Not Stretch the Signature to Fill 6×2 cm

A 6×2 frame does not mean the handwriting should be stretched until it touches both sides.

Stretching can make the signature:

• unnaturally wide;
• too thin;
• distorted compared with the original.

The tool above uses proportional fitting so the handwriting keeps its natural shape.

What If Your Signature Is Naturally Short?

Some people have compact signatures.

That does not mean the handwriting should be artificially widened.

Use a safe crop around the complete natural signature and allow proportional fitting to place it inside the output frame.

The purpose of the 6×2 image is to provide the required canvas, not to redesign your handwriting.

What If Your Signature Is Very Long?

A long signature may need careful cropping because the first and final strokes can be far apart.

Do not cut the ending flourish simply to make the signature look larger.

Keep the complete handwriting inside the source crop and let it fit proportionally inside the landscape frame.

What If the Signature Has a Long Underline?

If the underline is genuinely part of your usual signature, treat it as part of the handwriting.

Check:

• where the underline starts;
• where it ends;
• its lowest point.

Make sure the crop includes it completely.

What If a Dot or Thin Stroke Is Missing?

Compare the crop with the Original preview.

If the missing mark exists in the original, move the relevant crop boundary outward.

If the source itself never captured the mark clearly, use a better original rather than digitally drawing the stroke back into the image.

Do Not Redraw Missing Handwriting

Image resizing should format your existing signature, not create a new one.

If a real stroke has disappeared because of cropping, correct the crop.

If the original source itself is incomplete, use another source.

Do not redraw or digitally reconstruct the signature.

Do Not Whiten the Background Just to Make It Look Cleaner

Changing the original background does not automatically make the signature more compliant.

The tool above preserves the selected source pixels and natural background rather than automatically replacing them with an artificial white background.

This keeps the processing focused on the original signature image.

Why the Tool Does Not Artificially Sharpen the Signature

Artificial sharpening cannot recover handwriting detail that was never captured by the camera or scanner.

Strong filters can also create halos or unnatural stroke edges.

If your original source is badly blurred, the better solution is to capture a clearer source.

What Processing Does the Tool Actually Perform?

The tool above is designed around a practical signature-preparation workflow:

• read the original source;
• correct source orientation where necessary;
• detect the visible handwriting region;
• prepare a safe crop;
• allow crop correction in the Original preview;
• fit the handwriting proportionally;
• resize to the selected output dimensions;
• encode the result as JPG/JPEG;
• compress the result;
• validate the output information;
• generate the downloadable JPG.

It does not intentionally whiten, recolour, redraw, stretch or cosmetically redesign the signature.

Why Local Browser Processing Is Useful

A handwritten signature is personal information.

The normal processing workflow on SSC Signature Resize runs locally inside your browser.

The selected source does not need to be uploaded to the website server merely for normal cropping, resizing and compression.

You should still use a trusted device and keep the downloaded image securely stored.

More information is available in the Privacy Policy.

What About the Aadhaar Authentication Wording in the MTS Notice?

The MTS notice checked for this guide contains an Aadhaar-based authentication exception relating to rejection on the stated photograph/signature-standard grounds.

That wording should not be interpreted as a reason to intentionally ignore the signature specification.

The same notice still states the JPEG/JPG, 10–20 KB and approximately 6×2 cm signature requirement.

The practical approach is straightforward: prepare the signature to the stated specification and follow the application instructions presented to you.

Common SSC MTS Signature Mistakes

Mistake	Why It Can Be a Problem	Better Approach
Using an old 4×2 cm recommendation	It does not match the applicable 6×2 MTS instruction checked for this guide	Follow the applicable MTS notice and portal
Calling 709×236 an official SSC pixel rule	The MTS clause gives centimetres, not those exact pixels	Describe 709×236 as a technical 300-DPI conversion example
Calling 300 DPI mandatory	That requirement is not stated in the verified MTS signature clause	Use the official values actually shown in the applicable instruction
Using a tiny signature with large blank margins	The result can appear miniature	Use a safe crop around the complete handwriting
Cropping directly against the ink	A dot or finishing stroke can disappear	Keep a small natural margin
Stretching handwriting to fill the frame	The signature becomes distorted	Use proportional fitting
Using photograph specifications for the signature	Photo and signature requirements are separate	Use the signature-specific instruction
Using an already blurred source	Resizing cannot recreate lost handwriting detail	Start with a clearer original photo or scan

Complete SSC MTS Signature Workflow

1. Open the applicable SSC MTS application instructions.
2. Confirm that the signature requirement shown to you matches the values you intend to use.
3. Start from the clearest original signature source.
4. Upload the source to the tool above.
5. Inspect the Original preview.
6. Confirm that the handwriting is clear.
7. Let Smart AutoDetect identify the signature region.
8. Check the beginning of the signature.
9. Check the final flourish.
10. Check dots, loops and underlines.
11. Adjust crop lines or handles if necessary.
12. Keep a small natural safety margin.
13. Remove excessive distant blank background.
14. Rotate only when the whole source is incorrectly oriented.
15. Review the crop again after rotation.
16. Use the 6×2 cm default when it matches your applicable MTS instructions.
17. Use Custom values if your live form gives different dimensions.
18. Allow the processed result to refresh after every change.
19. Check that the output is JPG/JPEG.
20. Check the final dimensions.
21. Check the final file size.
22. Confirm that the result is inside the applicable KB range.
23. Confirm that the signature is not miniature.
24. Confirm that the signature is not badly blurred.
25. Confirm that no genuine stroke has been cut.
26. Download the JPG.
27. Open the downloaded image once.
28. Compare it with the MTS application instructions before final submission.

Final SSC MTS Signature Checklist

• The applicable MTS instructions have been checked.
• The output is a genuine JPEG/JPG.
• The final file size is inside the applicable 10–20 KB range.
• The signature frame follows the approximately 6×2 cm requirement when that is what the form specifies.
• The overall shape is approximately 3:1.
• 709×236 is treated as a conversion example rather than an invented official pixel rule.
• 300 DPI is not being falsely presented as an MTS requirement unless the application explicitly states it.
• The complete first stroke is visible.
• The final flourish is visible.
• Dots remain visible.
• Underlines remain complete.
• The signature has a small natural safety margin.
• There is not excessive blank background.
• The signature does not appear miniature.
• The signature is not badly blurred.
• The handwriting has not been stretched.
• The source background has not been unnecessarily replaced.
• The downloaded JPG has been opened and checked.
• The final application preview has been reviewed before submission.

Frequently Asked Questions

What is the SSC MTS signature size?

The MTS notice verified for this guide specifies a scanned signature in JPEG/JPG format, 10–20 KB, with image dimensions of about 6.0 cm wide × 2.0 cm high.

What is the SSC MTS signature file size?

The applicable MTS instruction checked for this guide specifies a 10–20 KB JPEG/JPG signature.

Is SSC MTS signature 6×2 cm or 4×2 cm?

The MTS notice verified for this guide uses about 6×2 cm. Older or third-party pages may show another size, so always confirm the requirement in the MTS application you are actually completing.

What is SSC MTS 6×2 cm in pixels?

There is no single pixel answer without choosing a resolution. At 300 DPI, 6×2 cm converts mathematically to approximately 709×236 pixels.

Is 709×236 the official SSC MTS pixel size?

The MTS signature clause checked for this guide does not state 709×236 as an exact pixel requirement. It is a mathematical representation of approximately 6×2 cm at 300 DPI.

Does SSC MTS require 300 DPI?

The verified MTS signature clause specifies JPEG/JPG, 10–20 KB and about 6×2 cm but does not state a separate mandatory 300-DPI requirement in that clause.

Is 240×80 the official MTS signature size?

240×80 has a 3:1 shape, but the MTS instruction checked for this guide gives physical dimensions rather than that exact pixel value. Do not label a third-party pixel choice as official unless SSC itself states it.

Why does the tool use 709×236?

The tool uses 709×236 as a practical digital representation of approximately 6×2 cm. At 300 DPI, 6×2 cm converts to roughly those pixel dimensions.

Why does the tool target approximately 10–18 KB instead of 20 KB?

The narrower range is a tool-side safety target that remains inside the official 10–20 KB range. It is not a separate SSC requirement.

Should my MTS signature be exactly 20 KB?

No. When the requirement is 10–20 KB, the final file needs to remain inside that range. It does not need to be exactly 20 KB.

Should my MTS signature be exactly 10 KB?

No. Ten kilobytes is the lower boundary of the stated range, not a target that every file must match exactly.

Can a 15 KB MTS signature still be wrong?

Yes. Correct file size does not guarantee correct dimensions, crop, clarity or handwriting coverage.

Can I use a phone photo for the MTS signature?

A clear phone photograph can be used as a source for the tool. Keep the signature in focus, capture every stroke and leave enough natural paper for safe cropping.

Can I use PNG as the source?

The tool above accepts supported raster source formats and prepares the processed result as JPG/JPEG.

Can I use a PDF signature?

A suitable single-page PDF can be used as a source. If you have a clearer original raster image, using that original may avoid an unnecessary conversion step.

Does the MTS signature have to use a specific pen colour?

The MTS signature clause verified for this guide does not state a pen-colour requirement. If your live application presents an additional instruction, follow that instruction rather than relying on an unsupported third-party claim.

Does Aadhaar authentication mean I can ignore the signature specification?

The notice includes an Aadhaar-authentication exception relating to rejection on the stated standards, but it still provides the signature specification. The practical approach is to prepare the file according to the stated requirement and follow the application instructions.

Does the tool whiten the signature background?

No. The tool is designed to preserve the selected original pixels and natural background instead of automatically whitening or replacing the source background.

Does the tool stretch the signature to fill 6×2 cm?

No. The processing is designed to fit the selected source proportionally rather than intentionally distorting the handwriting.

Is my signature uploaded to the website server?

The normal processing workflow is designed to run locally inside your browser, so the selected image does not need to be sent to the website server for standard signature preparation.

More SSC Signature Help

Use the SSC Signature Resize tool above to prepare the MTS signature from your clearest original source.

Before submitting the file, review the SSC signature upload checklist to check file size, crop and image quality.

If your signature still fails during upload, see the guide explaining common reasons an SSC signature may be rejected.

If your original source is PNG, follow the PNG to JPG signature conversion guide instead of simply renaming the file extension.

You can also browse more SSC signature guides and signature resizing guides.

For details about browser-based processing, read the Privacy Policy. More information about the independent utility is available on the About Us page.

Conclusion

For the SSC MTS notice verified for this guide, the signature requirement is straightforward once centimetres, pixels and KB are kept separate.

The official instruction uses a scanned JPEG/JPG signature of 10–20 KB with dimensions of about 6.0 cm × 2.0 cm.

That 6×2 shape is approximately 3:1.

The tool above currently uses 709×236 pixels for its 6×2 cm default. This is a useful digital representation because 6×2 cm converts to approximately 709×236 pixels at 300 DPI. However, those exact pixels and 300 DPI should not be falsely presented as an official MTS requirement when the applicable signature clause does not state them.

The safest workflow is to start with the clearest original source, let the tool detect the handwriting, review the crop yourself, preserve every genuine stroke, keep a small natural safety margin and verify the final JPG before uploading it.

Do not stretch a short signature, cut a long flourish, digitally recolour the handwriting or replace the natural source background merely to imitate a third-party example.

Most importantly, always compare the final file with the instructions shown in the SSC MTS application you are actually submitting. Requirements can change, and the active SSC application or notification remains the final authority.

SSC Signature Resize is an independent browser-based image utility and is not affiliated with, endorsed by, sponsored by or operated by the Staff Selection Commission or the Government of India.