Delhi Police AWO/TPO Signature Size: 10–20 KB JPG, 6×2 cm
If you are preparing a signature for the Delhi Police Head Constable Assistant Wireless Operator (AWO) or Tele-Printer Operator (TPO) application, the signature resizer is already available above this article. You can upload, check, resize and download the signature on this same page instead of opening another image website.
The official AWO/TPO application instructions checked for this guide require the scanned signature in JPEG/JPG format, within 10–20 KB, with an image dimension of about 6.0 cm wide × 2.0 cm high. Detailed upload instructions also require the signature to be horizontally aligned and warn against blurred or miniature signatures.
Delhi Police AWO/TPO Signature Requirements
The safest way to prepare the image is to follow the examination-specific signature instructions rather than using a generic government-form preset from another website.
| Requirement | AWO/TPO instruction | What to check |
|---|---|---|
| File format | JPEG/JPG | Use a JPG/JPEG file for the final upload. |
| File size | 10–20 KB | Keep the final generated file inside the permitted range. |
| Image dimension | About 6.0 × 2.0 cm | Use the approximate 3:1 landscape shape required for the signature image. |
| Orientation | Horizontal | Do not leave the signature sideways or vertically oriented. |
| Visual quality | Should not be blurred or miniature | Make sure the actual handwriting is clear and occupies a useful part of the image. |
These requirements should be checked together. A signature is not automatically ready just because its file size happens to be below 20 KB.
The Tool Is Already Above This Article
You do not need to leave this page to prepare the image. The signature tool displayed above this article is designed for this type of workflow.
Its standard output currently uses:
- 709 × 236 pixels
- 6 cm × 2 cm
- 10–18 KB generated JPG safety ceiling
- JPG/JPEG output
The tool also provides Exact Width, Exact Height and Maximum File Size controls when an application requires a different landscape size.
The 10–18 KB tool ceiling is intentionally below the official 20 KB maximum. This provides a small amount of safety headroom while keeping the generated JPG within the official 10–20 KB range.
That lower ceiling is a tool setting. It is not a separate SSC or Delhi Police requirement.
How to Resize Your AWO/TPO Signature on This Page
1. Upload a Clear Signature Source
Use the Upload Signature control in the tool above and select a clear image of your handwriting.
A good source should show the complete signature, including the beginning stroke, final stroke, dots and any upper or lower flourishes.
The tool can process supported image formats and a suitable single-page PDF source, while the final processed output is prepared as JPG/JPEG.
2. Review the Original Preview
After the file loads, the tool analyses the handwriting area automatically.
Automatic detection can save time, but do not treat it as a reason to skip visual inspection. Look at the Original Preview and confirm that the full signature is still visible.
Source images can vary greatly in lighting, background, margins, shadows and handwriting shape, so reviewing the preview is an important step.
3. Check the Crop Around the Signature
The goal of cropping is to remove unnecessary surrounding area without cutting any genuine part of the handwriting.
If an automatic crop edge is too close to a stroke, adjust the crop line or handle directly on the Original Preview.
Do not crop so tightly that the first or last stroke is touching the boundary. A small amount of the original background around the handwriting is useful as a safety margin.
4. Keep the Signature Horizontal
The detailed AWO/TPO upload instructions require the signature to be horizontally aligned.
If your source image is sideways, use the rotation control above and check the refreshed preview.
Rotation should correct the orientation. It should not change the natural shape of the handwriting.
5. Check the Output Size
For the approximately 6×2 cm requirement, the standard output above uses 709×236 pixels.
If the application instruction you are following gives a different exact width and height, use the Custom fields rather than forcing an unrelated preset.
Every time you change the output dimensions, review the newly generated result before downloading it.
6. Check the File Size
The official AWO/TPO signature range checked for this guide is 10–20 KB.
The tool automatically prepares and validates the generated JPG against its selected size settings. Check the final file-size information shown in the Result section.
7. Review the Processed JPG
Look at more than the KB number.
Check whether:
- the complete signature is visible,
- the handwriting is clear,
- the signature is horizontal,
- no stroke has been cropped,
- the signature occupies a reasonable amount of the image, and
- the displayed file size meets the requirement.
8. Download and Open the File
When the result is ready, use the Download JPG button above.
Open the downloaded image once on your phone or computer before uploading it to the application form. This simple check can reveal an incorrect old download, missing stroke or orientation problem before submission.
Is 709×236 Pixels the Official AWO/TPO Signature Size?
No. It should not be described as an independently mandated official pixel size unless the application itself specifically states those exact pixels.
The official instruction checked for this guide describes the signature dimension as approximately 6.0 cm × 2.0 cm.
709×236 pixels is a practical conversion of that physical size at approximately 300 DPI. It preserves almost exactly the same 3:1 landscape proportion.
This makes 709×236 useful for the tool, but it remains a technical conversion, not a separate official SSC pixel rule.
6×2 cm to Pixels Explained Simply
Centimetres describe physical size. Pixels describe the number of digital picture elements in an image.
To convert centimetres into pixels, a DPI value must be assumed. This is why different websites can show different pixel dimensions for what they describe as a 6×2 cm signature.
| Measurement | Reference | Meaning |
|---|---|---|
| Physical size | About 6 × 2 cm | The approximate dimension stated in the official instruction. |
| Tool conversion | 709 × 236 px | Approximate 300-DPI representation, not a separate official pixel requirement. |
| Shape | Approximately 3:1 | The landscape width-to-height relationship of 6×2 cm. |
If the application portal gives an exact pixel width and height, use the values shown there rather than calculating your own conversion.
Why Some Websites Show 140×60 Pixels
You may find an AWO/TPO recruitment page or image-resizing website that lists the signature as 140×60 pixels.
That should not automatically be treated as the requirement for the application instructions discussed here.
140×60 also has a different proportion from 6×2 cm. A 6×2 cm image has a 3:1 width-to-height ratio, while 140×60 is approximately 2.33:1.
Rather than choosing a number because it appears in a search result, compare it with the applicable official instructions.
Why You May Find an Old 20–50 KB Signature Rule
Older Delhi Police recruitment pages can remain indexed in search engines for a long time.
Some old pages show a signature range of 20–50 KB. That does not mean the same rule applies to the AWO/TPO application instructions covered in this guide.
The official AWO/TPO material checked here repeatedly gives the signature range as 10–20 KB.
This is an important reason to avoid relying on a search snippet without checking which recruitment process the information originally described.
Do Not Mix the Photograph and Signature Requirements
The photograph and signature are separate parts of the online application.
The application workflow uses a live photograph capture process, while the signature is uploaded as a scanned JPEG/JPG image.
This means photograph dimensions, photograph file-size limits or passport-photo instructions should not be copied into the signature field.
What Is a Miniature Signature?
The official instructions specifically warn about blurred or miniature signatures.
A miniature signature does not simply mean that the entire image has a small pixel count.
The actual problem is often that the handwriting occupies too little of the available frame.
For example, if a tiny signature appears in the centre of a very large sheet of blank paper and the entire sheet is resized, the actual handwriting can become extremely small in the final output.
The solution is to remove unnecessary surrounding space while keeping the complete signature and enough original background to protect the strokes.
How Much Blank Space Should Be Left Around the Signature?
There is no benefit in removing every possible pixel of background.
An extremely tight crop can be risky because it may clip the first stroke, final flourish, a dot or another small mark.
At the same time, excessive blank space can make the handwriting miniature.
A useful crop therefore balances both concerns:
- the complete handwriting remains inside the frame,
- a small natural safety margin is retained, and
- large unnecessary empty areas are removed.
Why the Tool Preserves the Original Signature Appearance
A signature-resizing utility should prepare the source technically rather than redesign the candidate's handwriting.
The tool above works from the original image and its natural appearance whenever possible. The process focuses on detection, cropping, resizing and JPEG compression.
It does not need to artificially whiten the paper, recolour the ink, change brightness or contrast, redraw strokes or invent missing parts of the signature.
If your original image is heavily blurred or badly photographed, using a clearer source is safer than trying to digitally reconstruct it.
Why 10–20 KB Does Not Tell You the Pixel Dimensions
Kilobytes and pixels measure different properties.
Pixels describe the width and height of a digital image.
Kilobytes describe approximately how much storage space the compressed image file uses.
Two JPG files can both be 709×236 pixels but have different file sizes because JPEG compression and image detail differ.
Likewise, two files can both be 15 KB while having different pixel dimensions.
This is why a proper signature check needs to consider:
- file format,
- file size,
- dimensions,
- orientation, and
- visual quality.
Common AWO/TPO Signature Upload Problems
Signature File Is Above 20 KB
A phone photograph or scan can easily be hundreds of kilobytes or several megabytes.
Upload the clearer original to the tool above and allow it to prepare a compressed JPG rather than repeatedly compressing an already damaged copy.
Signature Is Below 10 KB
A very low file size can be a sign that the image has already been compressed aggressively.
If the source looks unclear, return to a better-quality original before processing it again.
Signature Is Blurry
First check the source.
If the handwriting was already out of focus before resizing, reducing the image cannot recreate the detail that was never captured.
Use a clearer scan or well-focused photograph.
Signature Is Sideways
Use the rotation control above, then inspect both the Original Preview and processed output.
The final signature should be horizontally aligned.
Part of the Signature Is Missing
This usually means that a crop boundary is too tight.
Return to the Original Preview and move that edge outward until the complete stroke is visible.
Signature Looks Tiny
Check how much empty background remains around the handwriting.
If the signature occupies only a small part of the image, carefully reduce unnecessary surrounding space without cutting any stroke.
Signature Looks Stretched
Do not intentionally stretch the handwriting to force it to touch every edge of the output frame.
The signature can sit naturally inside a 6×2 cm landscape image while retaining its original proportions and appearance.
Wrong File Format
The official instruction specifies JPEG/JPG for the scanned signature.
The tool above prepares the final downloadable result as JPG/JPEG.
What If the Application Shows Different Dimensions?
Application requirements can change between examinations or notification cycles.
If the live application instruction gives a different exact dimension, use the Custom controls above.
You can enter:
- Exact Width in pixels,
- Exact Height in pixels, and
- Maximum File Size in KB.
After applying custom values, check the freshly processed result before downloading it.
Do not keep using an older downloaded image after changing the requirement.
Aadhaar-Based Authentication and Signature Standards
The official application instructions contain a specific exception for candidates using Aadhaar-Based Authentication concerning rejection on certain photograph or signature-standard grounds.
This should not be understood as advice to upload an intentionally poor image.
A clear signature that follows the stated JPEG/JPG format, size range, approximate dimensions and horizontal orientation remains the practical choice.
Delhi Police AWO/TPO Signature FAQs
What is the AWO/TPO signature file size?
The official application instructions checked for this guide require the scanned signature to be between 10 KB and 20 KB.
What format should the signature be?
The signature should be uploaded in JPEG/JPG format.
What is the AWO/TPO signature size in cm?
The official instructions specify an approximate dimension of 6.0 cm wide × 2.0 cm high.
What is the AWO/TPO signature size in pixels?
The official centimetre dimension should not be converted into one universal official pixel value. The tool above uses 709×236 pixels as its approximately 6×2 cm profile. This is a technical conversion rather than a separate official pixel mandate.
Is 140×60 pixels compulsory?
No universal 140×60 pixel rule should be assumed for the application instructions covered here. Follow an exact pixel value only when the applicable official application instruction specifically requires it.
Can the signature be 50 KB?
The official AWO/TPO instructions reviewed for this guide specify 10–20 KB. Do not rely on an older 20–50 KB rule from another recruitment page.
Should the AWO/TPO signature be horizontal?
Yes. The detailed upload instructions specifically say that the signature should be horizontally aligned.
Can I resize it using a mobile phone?
Yes. On a compatible modern browser, you can upload the source, inspect the crop, rotate when needed, review the result and download the JPG directly to your phone.
Can I upload a phone photograph of my signature?
A clear phone image can be used as a source when the handwriting is sharp, properly lit and not distorted by heavy shadow or perspective. Always inspect the processed result carefully.
Does the signature get uploaded to the website server?
The tool's image-processing workflow runs locally inside your browser, so the selected signature does not need to be sent to a separate image-processing server for cropping, resizing and compression.
Why does the tool use 10–18 KB when the requirement is 10–20 KB?
The tool uses a lower upper ceiling to leave some safety headroom below 20 KB. The official requirement remains 10–20 KB.
Can the tool guarantee that the application will be accepted?
No third-party image tool can guarantee acceptance of an application. It can help prepare the technical image output, while the applicable official application instructions and recruitment process remain the final authority.
Final Signature Checklist
- Use the signature requirement, not the photograph requirement.
- Prepare the final image as JPG/JPEG.
- Keep the file inside the required 10–20 KB range.
- Use about 6×2 cm when it matches the applicable instruction.
- Do not describe 709×236 pixels as an independently mandated official pixel size.
- Keep the signature horizontally aligned.
- Make sure the first and final strokes remain visible.
- Do not crop genuine handwriting.
- Avoid excessive blank space that makes the signature miniature.
- Start with a clear source if the existing image is blurred.
- Review the processed result after every crop, rotation or size change.
- Open the newly downloaded JPG once before uploading it.
- Compare the result with the applicable official application instructions before final submission.
Website Information
Learn more about this independent utility on the About Us page. You can also read the Privacy Policy, use the Contact Us page when you need website support, and review the Terms and Conditions.
